Kemankare, Ankarmassa, Ingjutning

2-component environmental anchor compound made from renewable raw materials. With ETA approval for fixing in masonry and non-cracked concrete. Stands for environmental awareness, safety and sustainable construction. Increases the proportion of renewable raw materials used in construction. Thanks to the ETA approval, the injection system can be used in public buildings. Low volatility of the organic substances (best possible emission class A+ according to the French VOC directive) which has a positive effect on the assembly of fasteners in "Green Building" projects. Bio-based raw materials increase the quality of living and working environments and save resources for future generations. The anchor mass is exempt from labelling, which reduces the risks to workers and the environment. Can be used both indoors and outdoors. Can be used with all fischer injection accessories. The two components are kept in two separate chambers and mixed and are not activated until the mass is discharged from the mixer tube. The anchor mass is extruded without bubbles from the base of the borehole. Ties the anchor to the borehole wall and seals the borehole. Quick and easy to use with fischer injection guns. Already used cartridges can be reused by changing the mixing tube.
Approved for anchoring in concrete C20/25 to C50/60, uncracked concrete, solid brick, hollow brick, sand-lime brick, sand-lime brick and lightweight concrete. The proportion of renewable material is certified by DIN CERTCO / TÜV Rheinland. ETA approved.

Universal anchoring compound of the two-component type. For mounting threaded rods and rebar in cracked and uncracked concrete, solid and hollow brick and lightweight concrete. ETA-approved for cracked, non-cracked concrete, masonry and for reinforcement. Expansion-free attachment with very high performance in all building materials. Maximum performance for enhanced security. Approved for use in water-filled boreholes, which makes it possible to use the compound under the absolute toughest conditions. Can be installed down to -10°C. ETA approval for post-injected reinforcement. Supplied with two mixing tubes.

Approved/Certified according to:
ETA-20/0603
ETA-20/0728
ETA-20/0729
DoP No. 0231
DoP No. 0232
DoP No. 0331
ESR-2786
20046/15515
22044-enshort
EPDDBCFIW20220088IBE2DE

Anchor compound approved for anchoring in cracked and uncracked concrete, masonry, for retrofitted rebar connections and for water-filled boreholes. The possible installation temperatures from -10 to 40°C allow universal use throughout the year. Free from dibenzoyl peroxide, which is classified as environmentally hazardous, sensitizing and eye irritating. The cartridge can be thrown in normal waste.

Approved/Certified according to:
Svanen
ETA-20/0572
ETA-20/0574
ETA- 21/0267
21046HK15511

Quick-hardening winter anchor compound. 2-component styrene-free hybrid anchor compound (contains cement) of vinyl ester type that works in all stone materials. The compound hardens in approx. 30 minutes at room temperature and fits into a standard grout gun. Works down to -15°. ETA approved.

Mixing tube for Fischer's FIS anchor compounds in cartridges with sizes 300 ml, 360 ml and 390 ml.

Manual blower for borehole cleaning. Thanks to a high blowout pressure, the drilling mud is blown out of the borehole. The borehole cover diverts the drilling dust away laterally and reduces the dust that the user is exposed to. A sealing ring prevents the drill flour from reaching the cylinder. Can be used for borehole cleaning in all solid and hollow building materials.

Gun fits FISCHER FIS SB 390 S, FIS V 360, FIS VW 360 S, FIS VS 360 S and FIS HB, 300 ml tubes.

Repair compound for damaged boreholes, a pulled out bad plug or a damaged wooden surface. Fill & Fix expands and hardens in the borehole in a few minutes. When the mass has hardened, screw the screw directly into the mass. The screw can be assembled and disassembled again. The hardened mass can be sanded and painted over.

Punch sleeve made of nylon. Used for assembly together with anchor compound in hollow bricks and cavities.

Stud screw for chemical anchor with washer and nut. Bevelled lace. For indoor use.
Materials: Steel 5.8.
Surface treatment: Electro-galvanized.

Cleaning brush with stainless steel bristles. Intended for cleaning boreholes in concrete and masonry, before installation of anchor compound. The brushes can either be used mechanically or manually with the handle, depending on the cleaning required.

Complete cleaning kit for safe and easy anchor compound installations. Customized accessories that make the work process faster. Wide range of cleaning brushes covering the most common diameters of boreholes. The brushes can be used manually or with a drill or screwdriver. Blower pump that effectively blows the boreholes clean. Joint sprayer suitable for standard cartridges in the sizes 150 ml, 300 ml, 360 ml and 390 ml. Compact and protective storage bag.
Contents:
Cleaning brushes Ø 10, 12, 14, 16/18 mm
Brush extension
SDS adapter
Air pump ABG
Joint sprayer FIS DM S Pro